Bearings for hydropower plants can be used even under water, because they are made of base metal with outstanding corrosion resistance and uses environment-friendly solid lubricants. They are used for a turbine and floodgate in the power station and customizable for small to large sizes (Ø2,000).
Applicable Materials | Bearings for Hydropower Plants
| Material Code | Standards | Specific Gravity | Hardness | Elongation | T/S | Remark | ||
|---|---|---|---|---|---|---|---|---|
| KS | DIN | ASTM | (g/cm3) | (HB) | (%) | (N/mm²) | ||
| SGO #500 SP21 | CAC304 | CuZn25Al5 | C86300 | 7.8 | 200 (10/3000) | 12 | 755 | Outstanding wear resistance for high strength, hardness and load |
| SGO #500 AB | CAC705 | CuAl10Ni | C95500 | 7.6 | 190 (10/3000) | 6 | 620 | Outstanding corrosion and fatigue resistance |
Applicable Solid Lubricant Plugs | Bearings for Hydropower Plants
| Code | Application | Materials | |||
|---|---|---|---|---|---|
| SL4 | Under Water | Graphite + PTFE | |||
| SL5 | High Pressure, Under Sea Water | Graphite + PTFE + Pb | |||
| SL7 | Eco-Friendly, Under Water | PTFE | |||
▶ Value indicated above is general value and it can be changed without notification for improvement.
Use | Bearings for Hydropower Plants
- Turbin
- Guide Vane Bushing, Guide Bushing and plates
- Dam Gate
- Radial Gate Trunnion Bushing, Roller Dam Gate Roller Bushing
